VHM carbon air intake KTM 450EXC-F / Husqvarna FE450 2019 - 2023 - AI060919E

Developed for an optimum air flow and made of real carbon. When the engine is running and temperatures rise, the airbox rubber usually deforms. This is due to the high temperatures as it get's more soft, which leads to an even less optimal air flow. Our carbon intake prevents the airbox from deforming and improves greatly on bottom power.

To use this air intake, you need a powerflow kit from Twin Air (part number 154222C).

Mounting the intake
1. Take the air filter cover off
2. First you need to disassemble the temperature sensor
3. Make sure the temperature sensor points down. Hold the intake in one hand, with the aluminium label facing towards you. Make small twist movements while pushing.
4. Ensure the intake is fitted all the way through the end, you need to give it a firm push. The hole for the temp. sensor should match the hole in the rubber.
5. Assemble the temperature sensor, it goes through the airbox rubber and intake.
6. Mount the air filter support from Twin Air powerflow kit 154222C and air filter cover for driving. The standard air filter support is too low, the air filter support from Twin Air is higher so the intake fits.
7. Need to clean your bike? You can mount an airbox cover so it's water resistant.

• Real carbon
• Massive bottom power improvement
• Optimum air flow
• Easy to mount
• Prevents airbox rubber from deforming at high temperatures
• Including hole for temperature sensor
• Ensures that dirt/mud is evenly spread over whole airbox

Must be used in combination with Twin Air powerflow kit 154222C